BRP EVINRUDE E-TEC BE225HGXABA, Manual

Page: 14 / 356

Reference Information
Service Specifications 90° 3.4 L Models
14
Service Specifications 90° 3.4 L Models
ENGINE
HP 250, 300
Full Throttle Operating Range 5300–6000 RPM
Power 250 HP: (183.9 kw) @ 5600 RPM
300 HP: (220.6 kw) @ 5600 RPM
Idle RPM in Gear 500 ± 50
Weight
(may vary depending on model) 20 in. (L) Models: 507 lbs. (230 kg)
25 in. (X) Models: 528 lbs. (239 kg)
30 in. (Z) Models: 534 lbs. (242 kg)
Lubrication Evinrude/Johnson XD100 Oil
Refer to Recommended Lubricants on p. 168
Engine Type 90° V 6-Cylinder Loop-Charged
Displacement 210.0 cu. in. (3441 cc)
Bore 3.854 in (97.89 mm)
Stroke 3.000 in. (76.20 mm)
Standard Bore 3.8535 to 3.8545 in. (97.87 to 97.90 mm)
To bore oversize, add piston oversize dimension to standard
bore
Top Crankshaft Journal 1.6199 to 1.6204 in. (41.15 to 41.16 mm)
Center Crankshaft Journals 2.1870 to 2.1875 in. (55.55 to 55.56 mm)
Bottom Crankshaft Journal 1.5747 to 1.5752 in. (40.0 to 40.01 mm)
Rod Crankpin 1.4995 to 1.5000 in. (38.09 to 38.106 mm)
Piston Ring End Gap, Both 0.022 to 0.028 in. (0.57 to 0.72 mm)
FUEL
Fuel/Oil Ratio EMM Controlled
Starting Enrichment EMM Controlled
Preferred Fuel Regular unleaded gasoline
Acceptable Fuel See Fuel Requirements on p. 138 for additional information.
Minimum (High) Fuel Pressure
@ IDLE RPM – 500 ± 50 22 to 28 psi (152 to 193 kPa)
Minimum Fuel Lift Pump Pressure
@ IDLE RPM – 500 ± 50 3 psi (21 kPa)
Maximum Fuel Inlet Vacuum 4 in. Hg. (13.5 kPa)
Minimum Octane 87 AKI (R+M)/2 or 90 RON
Additives
2+4
®
Fuel Conditioner , Fuel System Cleaner
Use of other additives may result in engine damage.
See
Fuel Requirements on p. 138 for additional information.