Troubleshooting: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/trouble.htm[9/5/2014 3:45:23 PM]
A TOE-enabled team that is bound to a Hyper-V virtual network will report TOE as an offload capability in BACS;
however, TOE will not work. This is a limitation of Hyper-V. Hyper-V does not support TOE.
In an IPv6 network, a team that supports CO and/or LSO and is bound to a Hyper-V virtual network will report CO and
LSO as an offload capability in BACS; however, CO and LSO will not work. This is a limitation of Hyper-V. Hyper-V does
not support CO and LSO in an IPv6 network.
To successfully perform VLAN tagging for both the host (parent partition) and the guest (child partition) with the BASP
teaming software, you must configure the team for tagging. Unlike VLAN tagging with a single adapter, tagging cannot
be managed by Hyper-V when using BASP software.
When making changes to a team or removing a team, remove the team's binding from all guest OSs that use any of
the VNICs in the team, change the configuration, and then rebind the team's VNICs to the guest OS. This can be done
in the Hyper-V Manager.
Windows Server 2008 R2
When configuring a team of NetXtreme II network adapters on a Hyper-V system, be aware of the following:
Create the team prior to binding the team to the Hyper-V virtual network.
Create a team only with an adapter that is not already assigned to a Hyper-V virtual network.
A BASP virtual adapter configured for VLAN tagging can be bound to a Hyper-V virtual network, and is a supported
configuration. However, the VLAN tagging capability of BASP cannot be combined with the VLAN capability of Hyper-V.
In order to use the VLAN capability of Hyper-V, the BASP team must be untagged.
When making changes to a team or removing a team, remove the team's binding from all guest OSs that use any of
the VNICs in the team, change the configuration, and then rebind the team's VNICs to the guest OS. This can be done
in the Hyper-V Manager.
Configuring VMQ with SLB Teaming
When Hyper-V server is installed on a system configured to use Smart Load Balance and Failover (SLB) type teaming, you
can enable Virtual Machine Queueing (VMQ) to improve overall network performance. VMQ enables delivering packets from an
external virtual network directly to virtual machines defined in the SLB team, eliminating the need to route these packets
and, thereby, reducing overhead.
To create a VMQ-capable SLB team:
1. Create an SLB team. If using the Teaming Wizard, when you select the SLB team type, also select
Enable HyperV
Mode
. If using Expert mode, enable the property in the Create Team or Edit Team tabs. See
Configuring Teaming
for
additional instructions on creating a team.
2. Follow these instructions to add the required registry entries in Windows:
http://technet.microsoft.com/en-us/library/gg162696%28v=ws.10%29.aspx
3. For each team member on which you want to enable VMQ, modify the following registry entry and configure a unique
instance number (in the following example, it is set to 0026):
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\
{4D36E972-E325-11CE-BFC1-08002BE10318}\0026]
"*RssOrVmqPreference"="1"
Removing the Broadcom NetXtreme II Device Drivers
Uninstall the Broadcom NetXtreme II device drivers from your system only through the InstallShield wizard. Uninstalling the
device drivers with Device Manager or any other means may not provide a clean uninstall and may cause the system to
become unstable. For information on uninstalling Broadcom NetXtreme II device drivers, see
Removing the Device Drivers
.
When removing the device drivers, Broadcom Advanced Control Suite is also removed as well as all other management
applications.
If you manually uninstalled the device drivers with Device Manager and attempted to reinstall the device drivers but could not,
run the Repair option from the InstallShield wizard. For information on repairing Broadcom NetXtreme II device drivers, see
Repairing or Reinstalling the Driver Software
.
