Linux BACS Installation: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/lnx_bacs.htm[9/5/2014 3:45:05 PM]
1. Enable HTTPS connection with 'the following command:
cimconfig -s enableHttpsConnection=true -p
2. Use the
cimserver -s
and
cimserver
commands, respectively, to stop and restart CIM server for the new
configuration to take effect.
Step 4: Install Broadcom CMPI Provider
Ensure that OpenPegasus is installed properly before installing CMPI Provider.
Install
Enter following command to install Broadcom CMPI Provider.
% rpm -i BRCM_CMPIProvider-{version}.{arch}.rpm
Uninstall
Enter following command to uninstall Broadcom CMPI Provider:
% rpm -e BRCM_CMPIProvider
Step 5: Perform Linux Firewall Configuration, If Required
Follow these procedures to open the appropriate ports in the firewall:
RedHat
1. Click
System
, select
Administration
, and then select
Firewall
.
2. Select
Other Ports
.
3. In the Port and Protocol Dialog box, select
User Defined
.
4. In the
Port/Port Range
field, add the port number.
5. In the
Protocol
field, add the protocol as TCP or UDP, etc.
6. Click
Apply
for the firewall rules to take effect.
Example:
For CIM-XML over HTTP, the port number is 5988 and protocol is TCP.
For CIM-XML over HTTPS, the port number is 5989 and protocol is TCP.
SuSE
1. Click
Compute
and then click
YaST
.
2. Select
Security & Users
on the left pane.
3. On the right pane, double-click
Firewall
.
4. Select
Custom Rules
on the left pane.
5. On the right pane click
Add
.
6. Enter the following values:
Source Network
: 0/0 (means all)
Protocol
: TCP (or the appropriate protocol)
Destination Port
:
<Port Number>
or
<Range of Port Numbers>
Source Port
: Leave blank.
7. Click
Next
and then click
Finish
for the firewall rules to take effect.
Example:
For CIM-XML, use the following values:
