Windows Driver and Management Application Installation: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/umwindrv.htm[9/5/2014 3:45:04 PM]
winrm enumerate winrm/config/Listener
or
winrm e
winrm/config/Listener
Helps to check which service listener are enabled and listening on
which port and IP Address.
winrm get winrm/config/Service
Checks WinRM Service Configuration.
winrm delete winrm/config/Listener?
Address=*+Transport=HTTPS
Deletes a Listener (in this case deleting a HTTPS listener).
Useful WinRM Websites
http://msdn.microsoft.com/en-us/library/aa384372%28v=vs.85%29.aspx
http://technet.microsoft.com/en-us/library/cc782312%28WS.10%29.aspx
http://msdn.microsoft.com/en-us/library/aa384295%28v=VS.85%29.aspx
The following articles on
"http://support.microsoft.com
:
"Configuring WINRM for HTTPS"
"Windows Management Framework (Windows PowerShell 2.0, WinRM 2.0, and BITS 4.0)"
WS-MAN Windows Client Installation
On the Windows client, perform following configuration steps.
1. Perform HTTP Configuration (if you plan to use HTTP)
a. Click
Start
(or press the Windows logo key) and select
Run
.
b. Enter
gpedit.msc
to open the local Group Policy editor.
c. Under
Computer Configuration
, open the
Administrative Templates
folder and then open the
Windows
Components
folder.
d. Select
Windows Remote Management (WinRM)
.
e. Under
Windows Remote Management (WinRM)
, select
WinRm Client
.
f. Under
WinRM Client
, double-click
Trusted Hosts
.
g. In the
TrustedHostsList
, enter the host names of the clients and click
OK
. If all clients are trusted then enter
an asterisk (*) only.
h. Select
WinRM Service
.
i. Enable
Allow Basic Authentication
and click
OK
.
j. Run the following command from the command prompt to test the connection:
winrm id -remote:<remote machine Hostname or IP Address>
2. Perform HTTPS Configuration (if you plan to use HTTPS)
After you generate a self-signed certificate, as described in
To generate a self-signed certificate for the Windows
Server:
, you can import the certificate on the client to facilitate a connection between server and client. Ensure that
all steps mentioned in section
To generate a self-signed certificate for the Windows Server:
are completed, including
copying
hostname.pfx
at the location from where client can access it, before you proceed with the following steps.
a. Click
Start
(or press the Windows logo key) and select
Run
.
b. Enter
MMC
and click
OK
.
c. Click
File
and select
Add/Remove Snap-in
.
d. Click
Add
.
e. Select
Certificates
and click
Add
.
f. Select
Computer account
and click
Next
.
g. Click
Finish
.
h. Click
Close
and then click
OK
.
i. Under
Certificates (Local Computer)
, right-click on
Trusted Root Certification Authorities
, select
All
Tasks
, and select
Import
.
j. Click
Next
to begin the Certificate Import Wizard.
