Brady LabelMark 5.0, User Manual

Page: 72 / 186

Formatting a Label
Line and Rectangle Elements
62
LabelMark 5.0 User’s Manual
Start Point Y Indicates the distance the top edge of a vertical line is from the top
of the label. Increasing the size of Start Point Y is the same as
dragging the top handle of the line downward, thereby shortening
the vertical line.
End Point X Indicates the distance the right edge of the line element (handle) is
from the right edge of the label. Decreasing the size of End Point X
is the same as dragging the right handle of the line toward the left,
thereby shortening the line.
End Point Y Indicates the distance the bottom edge of a vertical line is from the
bottom of the label. Decreasing the size of End Point Y is the same
as dragging the bottom handle of the line upward, thereby
shortening the vertical line.
Line Thickness Indicates the height of the line itself. Enter a measurement in the
Line Thickness field.
Note: When entering a fraction of an inch, be sure to enter a zero (0)
before the decimal point, (e.g., 0.125)
Property To Use