Brady LabelMark 5.0, User Manual

Page: 23 / 186

13
Getting Started
View
LabelMark5.0 User’s Manual
Editor
The Label Editor is activated in the Workspace area of the application window. The Label
Editor has two types of views.
• Single label view, where only one label is visible at a time.
• Multi-label view, where multiple labels are laid out in rows and columns, similar to the
way they are laid out on the liner. The labels are numbered, left to right, top to bottom.
By default, the Editor displays in multi-label view. (If a two-sided label is the selected part, the
“side 1 only” view is the default.) You can switch between the above two views.
In multi-label view, the Editor displays the maximum number of labels that can fit in the
Editor window, even though the labels are not yet created.
Horizontal and vertical rulers (located at the top and on the left side of the Editor) are visible
when a single label is viewed. The ruler measurement units are based on the measurement
units that you set in the Options function. (See
page 6 for more information.) The rulers track
the mouse movement for cursor position and highlights the label’s editable area.
View
When you start a new label file, if the selected part number contains more than one label, it
displays the multiple labels on the screen with a circled number next to each label to indicate
where that label is on the media liner.
To view one label in a multi-label layout:
1.
Click the label you want to view alone.
2.
Choose Visionless Label Layout
That label displays by itself in the upper left corner of the screen.
Note Note
When applying serialization, adding date/time text, or using the Command
Multiplier, you do not have to have all labels visible.
To view all the labels in a multi-label layout:
1.
Choose View> Multiple Label Layout.