Brady LabelMark 5.0, User Manual

Page: 16 / 186

Introduction
Options
6
LabelMark 5.0 User’s Manual
Options
If you use a specific font most of the time, or you always print to a certain printer, you can set
these features as defaults, thereby enabling you to bypass a number of formatting options
whenever you create a label file.
To change the default settings:
1.
Choose Tools>Options.
There are four categories of default settings listed on the left side of the Options dialog box.
2.
Click the category containing the settings you want to change.
General Options
General Options set the following default options:
• Printer
• Units of Measure
• Language
• Allow graphical label design
• Show label copies user interface
Format Options
The Format Options is used to set the following default options:
• Font
• Size
• Style
• Horizontal Justification
• Line Spacing
• Automatic Text Formatting (including Auto sizing and the Flip character to use when
applying the Flip-Flop function)
Auto Size
Selecting this option automatically adjusts the text size to fit the element size. As the text
overflows the element width, the font is decreased until it fits the line or reaches the minimum
font size of 6 points. After this point, text overflows beyond the zone. If you delete characters,
the font size starts increasing up to the original font size.