Brady LabelMark 5.0, User Manual

Page: 162 / 186

AutoCAD
152
LabelMark 5.0 User’s Manual
9.
If you selected the wrong part or the selection wasn’t as accurate as you would like, click
Deselect OR click some other part of the drawing that was not in the selection.
10.
To place the image back to its original selection, click Reset.
(If the data selected will not fit on the label part selected, the data will display in red. Change
the size of the data or click Back and choose a larger label.)
11.
Click Next.
12.
Click the drop down arrow and indicated on which labels the items should be displayed
13.
Indicate on which label the data should start and on which label the data should end.
14.
Click Next.
15.
If you want to save the file with a name other than the generic name, highlight the generic
file name and type the unique name directly over it. (Use Browse to locate the directory in
which you want to save the file, following normal Windows procedures.)
Imported data is bound (linked) to each other. As you format one, it is formatted the same on
all other labels on which it exists. (See Data Bound Objects, starting on
page 70 , for more
information.)