Brady LabelMark 5.0, User Manual

Page: 182 / 186

Application Wizards
110-Block Labels
172
LabelMark 5.0 User’s Manual
Note Note
A strip is one completed, fully populated label. If multiple strips are added, each
additional strip continues the numbering sequence from the last number of the
previous strip. Example: When requesting two strips of a 4-pair configuration, the
first strip will contain values 1-12, the second strip will contain numbers 13-24.
To use the 110-Block Wizard:
1.
On the Create New/Open dialog box, click Use a wizard to create labels .
2.
In the list of wizards, click 110 Block Labels , then click OK.
A list of applicable label part numbers displays.
3.
Click the part number to use, then click Next.
4.
On the Provide Label information screen, in the Block Width: field, enter the width of the
block that will contain the numbers on the label. Indicate fractions as a decimal.
(Example:1/4 = 0.25)
5.
In the Wire Pairs: field, indicate the pair configuration (i.e., 2-pair, 3-pair, 4-pair, 5-pair).
When entering the pair configuration, enter only the number.
6.
Click Next.