Brady LabelMark 5.0, User Manual

Page: 181 / 186

171
Application Wizards
110-Block Labels
LabelMark5.0 User’s Manual
110-Block Labels
The 110-Block label type is based on user-selected pair configurations, with the length of the
label determined by the pair type selected. The number and formatting of areas is based on pair
configuration and block type selected.
In the 110- Block label, the number of areas created is based on the pair configuration selected.
Vertical and horizontal separator lines are automatically added.
The following example displays the areas based on the wire pairs selected (i.e., 2-pair, 3-pair,
4-pair, 5-pair).
Block Type is used to determine how data is serialized. Horizontal increments one number per
area, based on the start value.
In Backbone block type, the left-most area on each strip prints with two numbers. The first
number is left-justified; the second number is right justified. All other areas print with one
right-justified number.