Bosch Rexroth lndraDrive HCS02 Series Project Planning Manual Download Page 301

Page: 301 / 382

Touch Guard at Devices

9.1

Cutouts

WARNING

Lethal electric shock caused by live parts with more than 50 V!

●

The appropriate touch guard must be mounted for each device following

connection work.

●

Never mount a damaged touch guard.

●

Immediately replace a damaged touch guard by an undamaged touch

guard.

●

Keep the cutouts at the touch guard as small as possible. Only remove

the cutouts if necessary.

Type 1

Type 2

Fig.9-1:

Cutouts at the touch guard

●

If the DC bus and the control voltage are connected by means of contact

bars, only cutout A may be removed from the touch guard.

●

If the DC bus and the control voltage are connected by means of cables

(e.g. in the case of multiple-line arrangement), the cutouts A, B and C may

be removed from the touch guard.

●

At the first and last device in a line of interconnected devices, you must

not remove any cutout at the outer side of the touch guard.

Project Planning Manual | Rexroth IndraDrive

Electric Drives

and Controls

| Bosch Rexroth AG 291/369

Touch Guard at Devices

Summary of Contents for Rexroth lndraDrive HCS02 Series































































































































































































































































































































































































Search results

Summary of Contents for Rexroth lndraDrive HCS02 Series

Reviews:

Related manuals for Rexroth lndraDrive HCS02 Series

Brands by name

Popular brands

Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Search results

Summary of Contents for Rexroth lndraDrive HCS02 Series

Reviews:

Related manuals for Rexroth lndraDrive HCS02 Series

Brands by name

Popular brands