Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 307 / 382

● press "^" key
● press "Enter" key
● press "Enter" key
● with "v" or "^" key select the desired language
Fig.10-9: Setting the language
10.1.2 Diagnostic Messages Displayed at IndraDrive M Supply Units
HMV - Diagnostic Messages for Operating States and During the Initialization Phase
For detailed descriptions of the diagnostic messages mentioned in
this chapter, see Troubleshooting Guide of the firmware documen‐
tation.
Display
Diagnostic message num‐
ber
Diagnostic message
VM P0 A0000 Communication phase 0
VM P1 A0001 Communication phase 1
VM P2 A0002 Communication phase 2
VM P3 A0003 Communication phase 3
VM Bb A0012
Control and power sections
ready for operation
VM bb A0013 Ready for power on
VM Lb A0500
Supply module in voltage
control
VM I Lb A0501
Supply module in current
control
VM Lb A0502 Supply module in operation
VM charg A0503 DC bus charging active
VM lb A0510 Test run for voltage control
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 297/369
Operation and Diagnosis