Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 260 / 382

8.5.2 X3, Mains Connection HMV02.1R-W0015
View Identifica‐
tion
Function 3-phase operation
L1 connection to supply mains (L1)
L2 connection to supply mains (L2)
L3 connection to supply mains (L3)
connection of equipment grounding conductor of drive con‐
troller
Screw connection at connector
Unit Min. Max.
tightening torque Nm 1,5 1,7
connection cable
stranded wire
mm 2
1,5 6
AWG 16 10
occurring current load and minimum required
connection cross section
A see Technical Data of device used (I
L_cont
, I
L_max
and A
LN
)
occurring current load V see Technical Data of device used (U
LN
)
Fig.8-10: Function, pin assignment, properties
8.5.3 X3, Mains Connection HCS02.1E-W0012, ‑W0028
View Identifica‐
tion
Function 3-phase operation Function 1-phase operation
L1 connection to supply mains (L1)
L2 connection to supply mains
(L2)
connection to neutral conduc‐
tor supply mains
L3 connection to supply mains
(L3)
n.c.
connection of equipment grounding conductor of drive con‐
troller
Screw connection at connector
Unit Min. Max.
tightening torque Nm 0,5 0,6
connection cross section
stranded wire mm
2
/
AWG
1,5 / 16 4 / 10
250/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points