Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 272 / 382

8.7.2 Connection Point
View Connec‐
tion
Signal name Function
1 input motor temperature eval‐
uation
2 MotTemp-
3 +24V output for controlling the mo‐
tor holding brake
4 0V
Spring terminal (connector) Unit Min. Max.
connection cable solid wire
mm 2
0,5 1,5
connection cable stranded wire
mm 2
0,5 1,5
AWG 20 16
current load capacity X6.3, X6.4:
HCS02.1E-W0012; ‑W0028; ‑W0054; ‑W0070 A - 2
HCS03.1E-W0070; ‑W0100; ‑W0150; ‑W0210 A - 2
HCS04.1E A - tbd
HMS01.1N-W0020; ‑W0036 A - 1,6
HMS01.1N-W0054; ‑W0070 A - 2
HMS01.1N-W0110; ‑W0150; ‑W0210 A - 2,5
HMS02.1N-W0028; ‑W0054 A - 2
HMD01.1N-W0012; ‑W0020; ‑W0036 A - 1.5 per axis
time constant of load ms - 50
number of switching actions at max. time con‐
stant of load
250.000
switching frequency Hz - 0,5
short circuit protection X6.3 against X6.4 (output for controlling the motor holding
brake)
overload protection X6.3 against X6.4 (output for controlling the motor holding
brake)
integrated contact element for controlling the mo‐
tor holding brake:
HCS02.1E
HMS02.1N
electromechanical contact
HCS03.1E
HCS04.1E
HMS01.1N
HMD01.1N
electronic contact
Fig.8-26: Function, pin assignment
262/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points