Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 276 / 382

connection cross section solid wire mm 2 1,0 1,5
connection cross section stranded wire mm 2 1,0 1,5
connection cross section AWG 18 16
power consumption W see P
N3
(see index entry with reference to the corresponding
page)
voltage load capacity V see U
N3
(see index entry with reference to the corresponding
page)
current carrying capacity “looping through” from
+24V to +24V, 0V to 0V
continuous current P
N3
/U
N3
A 6
current carrying capacity “looping through” from
+24V to +24V, 0V to 0V
inrush current I
EIN3
A 12
polarity reversal protection within the allowed voltage range by internal protective diode
Fig.8-30: Function, pin assignment, properties
Notes on Installation Requirements on the connection to the 24V supply:
●
minimum cross section: 1 mm 2
● maximum allowed inductance: 100 µH (2 twisted single strands, 75 m
long)
● parallel line routing where possible
The control voltage supply is routed to the connection X13 from above:
266/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points