Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 203 / 382

Description Symbol Unit HMV01.1E-W0030 HMV01.1E-W0075 HMV01.1E-W0120
mains fuse according to IEC
60364‑5‑52; at nom. data with
mains choke; U
LN_nenn
A 63 160 250
required wire size according to
IEC 60364‑5‑52; at I
L_cont
11)
A
LN
mm 2 10 50 95
required wire size according to
UL 508 A (internal wiring); at I
L_cont
(UL) 12)
A
LN
AWG AWG 6 AWG 1 AWG 4/0
1) 600 V AC or less, use listed AC input line fuses or listed circuit breakers
2) 3) mains voltage > ULN: use a transformer with grounded neutral point,
don't use autotransformers!
4) otherwise use mains choke HNL
5) HMV0x.xR: Rsc=100; HMV0x.xE, HCS0x.xE: Rsc=50
6) depending on mains input voltage ULN; HMV01.1R see following note;
HMV: constant current charge, HCS: resistance charge; minimum of
250.000 load cycles
7) without external capacities on DC bus
8) 9) find interim values by interpolation
10) at PDC_cont
11) copper wire; PVC-insulation (conductor temperature 70 °C); installation
method B2; Table B52-4; Ta ≤ 40 °C
12) copper wire; PVC-insulation (conductor temperature 90 °C); Table
13.5.1; Ta ≤ 40 °C
Fig.7-15: HMV - Data for mains voltage supply
Qualitative characteristic TPF vs. DC bus power PDC_cont
1 with mains choke
2 without mains choke
Fig.7-16: Qualitative characteristic TPF vs. DC bus power PDC_cont
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 193/369
IndraDrive M Supply Units