Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 315 / 382

11.2.3 Usage
The HAS01 accessories are used to
●
fix the drive controllers to a mounting surface
● connect the DC bus connections of drive controllers
● connect the 24V supply of drive controllers of the Rexroth IndraDrive M
range
● connect the equipment grounding conductor from drive controller to drive
controller or supply unit
● increase the current carrying capacity of the contact bars in the DC bus
for high-performance devices (by means of the parts “end piece” and
“bar” in HAS01; see chapter “Assignment”)
Use of the parts “end piece” and “bar”
For high-performance devices, you have to mount the end pieces
and bars contained in the HAS01 accessory (see chapter “Assign‐
ment”).
See sections “Terminal Block L+, L- (DC Bus Connection)” and “Terminal Block,
24V - 0V (24V Supply)” in the Project Planning Manual "Rexroth IndraDrive,
Supply Units and Power Sections".
11.2.4 Assignment
The accessories are assigned to the individual devices depending on the device
width (see section “Type Code” ).
Device type Width / mm Accessory HAS01.1-
with “end
piece”
HMS01.1N- W0020 50 050 -
W0036 50 050 -
W0054 75 075 -
W0070 100 100 -
W0110 125 125 -
W0150 150 150 -
W0210 200 200 ■
W0350 350 350 ■
HMD01.1N- W0012 50 050 -
W0020 50 050 -
W0036 75 075 -
HMS02.1N- W0028 49.5 050 -
W0054 74.5 075 -
HLB01.1 D 100 100 -
HLC01.1 D 100 100 -
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 305/369
Accessories