Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 286 / 382

Assignment Connec‐
tion
Signal
name
Function
Supply units with integrated mains contactor Provides message signals for
evaluation on the status of the in‐
tegrated mains contactor of sup‐
ply units.
The floating contacts are me‐
chanically connected to the inte‐
grated mains contactor.
4 - A) N/O contact of integrated
mains contactor
closed with mains contactor
picked up
3 -
2 - B) N/C contact of integrated
mains contactor
open with mains contactor picked
up
1 -
Fig.8-45: Function, pin assignment
Properties
Data Unit Min. Typ. Max.
number of poles 4
type spring terminal
design pins at device
connection cable solid wire
mm 2
0,5 1,5
connection cable stranded wire
mm 2
0,5 1,5
AWG 20 16
Data of integrated N/O and N/C contacts (A and B) of HMV02.1, HMV01.1 except for
HMV01.1R-W0120
current load capacity
A 1
peak current when switching on A 5
voltage load capacity V DC30
minimum load of contacts mA 10
contact resistance at minimum
load
mOhm 1000
number of mechanical switching
cycles
10 6
number of switching actions at
max. time constant of load
100.000
time constant of load ms 50
pick up delay ms 10
drop out delay ms 10
Fig.8-46: Properties
276/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points