Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 241 / 382

Description Symbol Unit HMV02.1R-W0015
minimum inductance of the mains
supply (inductance of mains
phase) 4)
L
min
µH 50
assigned type of mains choke HNL02.1R-0980-C0023-A-480
minimum short circuit power of the
mains for failure-free operation 5)
S
k_min
MVA 1,6
maximum inrush current 6)
I
L_trans_max_
on
A I L_cont
maximum allowed ON-OFF cycles
per minute 7)
1
power factor TPF (λ
L
) at P
DC_cont
with mains choke; U
LN_nenn
TPF 0,99
power factor of fundam. compo‐
nent DPF at P
DC_cont
with mains
choke
cosφ h1
0,97
mains connection power at
P
DC_cont
; U
LN_nenn
with mains choke
S
LN
kVA 15,75
rated input current (UL) 8)
I
L_cont
A 23,0
nominal current AC1 for mains con‐
tactor at nom. data with mains
choke; U
LN_nenn
mains contactor integrated
mains fuse according to IEC
60364‑5‑52; at nom. data with
mains choke; U
LN_nenn
A 35
required wire size according to
IEC 60364‑5‑52; at I
L_cont
9)
A
LN
mm 2 4
required wire size according to
UL 508 A (internal wiring); at I
L_cont
(UL) 10)
A
LN
AWG AWG 10
1) 600 V AC or less, use listed AC input line fuses or listed circuit breakers
2) 3) mains voltage > ULN: use a transformer with grounded neutral point,
don't use autotransformers!
4) otherwise use mains choke HNL
5) HMV0x.xR: Rsc=100; HMV0x.xE, HCS0x.xE: Rsc=50
6) depending on mains input voltage ULN; HMV01.1R see following note;
HMV: constant current charge, HCS: resistance charge; minimum of
250.000 load cycles
7) without external capacities on DC bus
8) at PDC_cont
9) copper wire; PVC-insulation (conductor temperature 70 °C); installation
method B2; Table B52-4; Ta ≤ 40 °C
10) copper wire; PVC-insulation (conductor temperature 90 °C); Table
13.5.1; Ta ≤ 40 °C
Fig.7-59: HMV - Data for mains voltage supply
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 231/369
IndraDrive M Supply Units