Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 187 / 382

Description Symbol Unit HMD01.1N-W0012 HMD01.1N-W0020 HMD01.1N-W0036
maximum output current at
I
out_base_5
; f
s
= 12 kHz; t = 60 s;
T = 10 min; K = 1,1 19)
I
out_peak5_12
A -
base load current at I
out_peak_5
;
f
s
= 12 kHz; t = 60 s; T = 10 min;
K = 1,1
I
out_base5_12
A -
maximum output current at
I
out_base_5
; f
s
= 16 kHz; t = 60 s;
T = 10 min; K = 1,1 20)
I
out_peak5_16
A -
base load current at I
out_peak_5
;
f
s
= 16 kHz; t = 60 s; T = 10 min;
K = 1,1
I
out_base5_16
A -
1) 2) 3) 4) 5) 6)
7) 8) 9) 10)
11) 12) 13)
14) 15) 16)
17) 18) 19)
20)
see definition profile UEL_I_e
Fig.6-88: HMD - Examples of allowed current profiles
Current Profile “UEL_I_e” The following current profiles have been defined for converters and inverters.
Profile Explanation
current profile “UEL_I_e” The characteristic data of the profile are used to
select converters and inverters for operation with
standard motors and servo drives.
Fig.6-89: Definition of current profiles
Operation With Standard Motors
General Information
Selecting Standard Motors The tables below show the nominal powers P
nenn
of standard motors which can
be operated at the respective drive controller. The data are subject to the fol‐
lowing conditions:
●
motor design:
4-pole standard motor (2 pole pairs) with rated voltage 3 AC 400 V, 50 Hz
at mains voltage U
LN
≥ 3 AC 400 V or
4-pole standard motor (2 pole pairs) with rated voltage 3 AC 460 V, 60 Hz
at mains voltage U
LN
≥ 3 AC 460 V
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 177/369
Power Sections for Inverters - IndraDrive M