Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 254 / 382

Functions Device Connec‐
tion point
Description /
properties
cable shield - control lines HMS
HMD XS1 shield connection control lines
cable shield - motor lines HMS
HMD XS2 for accessory HAS02
shield connection motor cable
supply external blower unit HAB01 HMV01.1R-
W0120
X13 system-internal connection
blower control depending on cooling sys‐
tem load
HCS02.1E-
Wxxxx-A-03-
LxxN
HCS03.1E-
Wxxxx-A-05-
LxxV
- reduces noise development in operation under
partial load
mechanical receptacle for braking resistor
HLR01 at the top
HCS03.1E-
W0070…210
- allows ventilating braking resistor HLR in “outlet
air” of converter
mechanical receptacle for mains filter
HNK01 and motor filter HMF01 at the bot‐
tom
HCS03.1E-
W0070…210
- allows ventilating mains filter HNK01 and motor
filter HMF01 in “supply air” of converter
Fig.8-1: Functions
8.2 Electrical Connection Points – Overview
Connection point Device Brief description
X1
HCS02
7)
HCS03
HMS01
HMS02
HMD01
HMV01
HMV02
HLB01
module bus
connection in drive system
X2 HMV01
HMV02 commissioning and service interface
X3 HCS02
HCS03
HMV01
HMV02
mains connection
X5 HCS02
HCS03
HMS01
HMS02
inverter output
connection to motor
7)
not available at HCS02.1E-W0012
244/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points