Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 288 / 382

Properties
Data Unit Min. Typ. Max.
number of poles 2
type spring terminal
design pins at device
connection cable solid wire mm 2 0,5 1,5
connection cable stranded wire mm 2 0,5 1,5
AWG 20 16
current load capacity A DC1
AC2
fuse F1 A 2
peak current when switching on A 5
voltage load capacity V DC30
AC250
minimum load of contacts mA 10
contact resistance at minimum
load
mOhm 1000
number of mechanical switching
cycles
10
6
number of switching actions at
max. time constant of load
100.000
time constant of load ms 50
pick up delay ms 10
drop out delay ms 10
Fig.8-50: Properties
Notes on Installation Only use mains contactors with overvoltage limiter at the contactor coil (e.g.
mains contactor 3RT1456-6AP36 with overvoltage limiter 3RT1956-1CD00 by
Siemens).
8.16 X40, Acknowledge Messages of External Mains Contactor
The connection point X40 is available at HMV01.1R-W0120 with
hardware index ≥ A11; X33 does not exist at HMV01.1R-W0120.
View
Fig.8-51: View
278/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points