Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 102 / 382

Description Symbol Unit
HCS03.1E-
W0070-_-05
HCS03.1E-
W0100-_-05
HCS03.1E-
W0150-_-05
HCS03.1E-
W0210-_-05
DC bus power at U
LN_nenn
;
T
a
≤ T
a_work
; t = 60 s; T = 10 min;
K = 1.1; without mains choke 15)
P
DC_base_5
kW 12,16 22,03 32,10 44,24
DC bus power at U
LN_nenn
;
T
a
≤ T
a_max
; t = 60 s; T = 10 min;
K = 1,1; with mains choke 16)
P
DC_base_5
kW 23,41 39,46 52,86 80,00
1) 2) 3) 4) 5) 6)
7) 8) 9) 10)
11) 12) 13)
14) 15) 16)
see definition profile UEL_P_e
Fig.5-74: HCS - Examples of allowed performance profiles
Performance Profile “UEL_P_e” The following performance profiles have been defined for converters and in‐
verters.
Observe the allowed performance data P
DC_peak
and P
DC_base
in the
corresponding performance profile of the supply unit or converter.
Profile Explanation
performance profile “UEL_P_e” Characteristic of the selection of standard motors
and servo drives.
Fig.5-75: Definition of performance profiles, infeeding supply units and converters
Operation With Standard Motors
General Information
Selecting Standard Motors
The tables below show the nominal powers P
nenn
of standard motors which can
be operated at the respective drive controller. The data are subject to the fol‐
lowing conditions:
●
motor design:
4-pole standard motor (2 pole pairs) with rated voltage 3 AC 400 V, 50 Hz
at mains voltage U
LN
≥ 3 AC 400 V or
4-pole standard motor (2 pole pairs) with rated voltage 3 AC 460 V, 60 Hz
at mains voltage U
LN
≥ 3 AC 460 V
● assigned mains choke is used
● operation at minimum switching frequency f
s
= f
s
(min.)
● rotary field at output with f
out
>f
out_still
92/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Power Sections for Converters - IndraDrive C