Bosch Rexroth lndraDrive HCS02 Series, Project Planning Manual

Page: 267 / 382

8.6.4 X5, Motor Connection HMS01.1N-W0110
View Identifica‐
tion
Function
A1 for power connection U1 at motor
A2 for power connection V1 at motor
A3 for power connection W1 at motor
for equipment grounding conductor of motor
Terminal block
Unit Min. Max.
screw thread M6
tightening torque Nm 5,5 6,5
connection cables
stranded wire with ring cable lug mm 2 1×16; 1×25; 1×35
2×16; 2×25; 2×35
AWG 1×6; 1×4; 1×2; 1×1
2×6; 2×4; 2×2; 2×1
occurring current load and minimum required
connection cross section
A see technical data of device used (I
out
)
occurring voltage load V see technical data of device used (U
out
)
short circuit protection A1, A2, A3 against each other and each of them against
ground
Fig.8-20: Function, pin assignment, properties
8.6.5 X5, Motor Connection HCS03.1E-W0100…0150 and HMS01.1N-
W0150…0210
View Identifica‐
tion
Function
A1 for power connection U1 at motor
A2 for power connection V1 at motor
A3 for power connection W1 at motor
for equipment grounding conductor of motor
Project Planning Manual | Rexroth IndraDrive Electric Drives
and Controls
| Bosch Rexroth AG 257/369
Functions and Electrical Connection Points