Banner iVu Plus BCR, User Manual

Page: 89 / 155

Command Group Item Description
Set Ethernet Gateway Set new Gateway IP address. A 'Re-
boot' command is required to be sent
from the command channel to make
the new address effective.
Examples
>> do system save \x0D\x0A
<< OK\x0D\x0A
8.4 Status Command Group
Command Group Item Description
Get Status Ready Flag indicating whether the sys-
tem is ready to trigger (true) or
busy (false)
Get Status SystemError Flag indicating whether a sys-
tem error is active (true) or
cleared (false)
Do Status ClearSystemError Clears the system error LED
and sets the internal flag to
false.
Examples
>> get status ready \x0D\x0A
<< OK\x0D\x0A
<< True\x0D\x0A
>> get status systemerror \x0D\x0A
<< OK\x0D\x0A
<< False\x0D\x0A
>> do status clearsystemerror \x0D\x0A
<< OK\x0D\x0A
8.4 Trigger Command Group
Command Group Item Description
Get Trigger Mode The sensor's triggering mode.
This value must match the
modes supported by the sensor.
This value can be modified us-
ing the sensor's touchscreen.
This remotely modified value is
not persisted to the sensors per-
manent memory. The 'Save' op-
iVu Plus BCR User's Manual
Rev. B www.bannerengineering.com - tel: 763-544-3164 89