7. Press the Focusing Window onto the housing to make sure that it seats correctly (that is, there is no gap between the window and
housing. Rotate the window counter-clockwise at least two turns.
8. Replace the locking tab screw but do not tighten until you have set up and focused the sensor again.
To install a filter on the iVu Series sensor with C-Mount Lens, use the illustration as a guide and follow the steps listed below.
C-Mount Models
D
C
A
B
E
C
A
C-Mount Lens
B
Lens Enclosure
C
Retainer Ring (optional)
D
Filter (optional)
E
Filter Retainer Ring Tool
NOTE: Filter Kits are available separately.
1. Remove the Lens Enclosure and Lens.
2. Install filter behind the retainer ring. Make sure it is fully seated.
3. Using the provided retainer ring tool, thread the retainer ring into the sensor until it firmly seats the filter.
4. Replace the Lens and Lens Enclosure on the camera.
CAUTION: Avoid the damage that electrostatic discharget (ESD) can cause to the sensor. Always
use a proven method for preventing electrostatic discharge when installing a lens or attaching a cable.
2.2 Live Mode Overview
The iVu Plus BCR can be configured to evaluate one or more of the supported barcode types and can look for a specific number of
barcodes from 1 to 10. The barcode types are selected on the integrated touch screen by accessing Main Menu > Inspection > Bar-
iVu Plus BCR User's Manual
16
www.bannerengineering.com - tel: 763-544-3164
Rev. B
Summary of Contents for iVu Plus BCR
Page 1: ...iVu Plus BCR User s Manual Rev B 1 25 2012...
Page 56: ...iVu Plus BCR User s Manual 56 www bannerengineering com tel 763 544 3164 Rev B...
Page 64: ...iVu Plus BCR User s Manual 64 www bannerengineering com tel 763 544 3164 Rev B...
Page 104: ...iVu Plus BCR User s Manual 104 www bannerengineering com tel 763 544 3164 Rev B...
