3.2.9 Firmware Update
The Firmware Update screen is used to load the latest sensor firmware. The Firmware Update screen lists the firmware versions it finds
in the BANNER\FIRMWARE folder on the USB drive. When you receive a firmware update from Banner Engineering, be sure to put it in
the BANNER\FIRMWARE folder on the USB drive.
NOTE: The Firmware Update menu is not available on the Emulator.
Main Menu > System > Firmware Update
3.3 Imager Menu
The Imager menu icon is on the Main Menu, and lists parameters that affect the characteristics of the captured image.
Main Menu > Imager
3.3.1 Auto Exposure
Auto Exposure optimizes the exposure time and gain for the current lighting conditions. Multiple triggers are required to complete this
function.
NOTE: The Auto Exposure option is not available on the Emulator.
Main Menu > Imager > Auto Exposure
3.3.2 Exposure
Exposure is the amount of time the sensor allows light to energize the imager. Increasing the exposure time by moving the slider to the
right allows more light to energize the imager, which brightens the image.
iVu Plus BCR User's Manual
Rev. B
www.bannerengineering.com - tel: 763-544-3164
35
Summary of Contents for iVu Plus BCR
Page 1: ...iVu Plus BCR User s Manual Rev B 1 25 2012...
Page 56: ...iVu Plus BCR User s Manual 56 www bannerengineering com tel 763 544 3164 Rev B...
Page 64: ...iVu Plus BCR User s Manual 64 www bannerengineering com tel 763 544 3164 Rev B...
Page 104: ...iVu Plus BCR User s Manual 104 www bannerengineering com tel 763 544 3164 Rev B...
