Banner iVu Plus BCR, User Manual

Page: 88 / 155

Command Group Item Description
Get Info RemoteModelNumber The model number of the re-
mote display as a string.
Get Info RemoteSerialNumber The serial number of the remote
display as a string.
Examples
>> get info companyname \x0D\x0A
<< OK\x0D\x0A
<< "Banner Engineering Corp."\x0D\x0A
>> get info bootnumber \x0D\x0A
<< OK\x0D\x0A
<< 42\x0D\x0A
>> get info uptimer \x0D\x0A
<< OK\x0D\x0A
<< 4:42:42:324\x0D\x0A
8.4 System Command Group
Command Group Item Description
Do System Reboot Reboots the sensor. Pre-empts other
commands except Save.
Do System Save Saves inspection and configuration pa-
rameters. Blocks until finished. Should
be used sparingly.
Get Ethernet IPAddress Get the current active IP address of
the sensor as a string.
Get Ethernet SubnetMask Get the current active subnet mask of
the sensor as a string.
Get Ethernet Gateway Get the current active Gateway ad-
dress of the sensor as a string.
Set Ethernet IPAddress Set IP address of the sensor. A valid
IP address must be supplied as a
string (for example: 192.168.0.1). A
'Reboot' command from the command
channel must follow in order to make
the new IP address effective. You may
also set new Subnet Mask and Gate-
way address as required before a 'Re-
boot' command is sent to the sensor.
Set Ethernet SubnetMask Set new subnet mask. A 'Reboot' com-
mand is required to be sent from the
command channel in order to make
the new mask effective.
iVu Plus BCR User's Manual
88 www.bannerengineering.com - tel: 763-544-3164 Rev. B