Banner iVu Plus BCR, User Manual

Page: 140 / 155

9.7 Error Codes
The iVuPlus sensor provides error codes in cases when commands failed to execute successfully. If such an error occurs, the Execution
Error flag is set in the Output Bit/Coil Register. When this bit is set, read the Error Code register to know the reason of failure. Below is
the list of error codes:
Numeric ID Text ID Description
0 SUCCESS Command processed successfully.
500 IE_TRIGGER_MODE_EXPECTED The Trigger Mode must be set to 'Industrial Ethernet' to per-
form this operation.
510 IE_COMMAND_NOT_FOUND The numeric Command ID specified was not found.
520 IE_COIL_ACTION_FAILED The coil action resulted in a failure.
521 IE_COIL_ALREADY_BUSY The coil was asserted before previous execution completed.
522 IE_COIL_NOT_FINISHED The coil was de-asserted prior to execution completing.
523 IE_COIL_ANOTHER_ACTION_PENDING The coil was asserted prior to another coil execution com-
pleting.
524 IE_COIL_MULTIPLES_DETECTED Multiple coils were asserted simultaneously.
525 IE_COIL_ACK_INHIBITED The coil action's output ACK was inhibited because the in-
put coil was no longer set.
10252 COMMAND_NOT_FINISHED Attempt to issue command when a previous command has
not finished
10340 MINIMUM_VALUE_EXCEEDED New item value is below the minimum
10341 MAXIMUM_VALUE_EXCEEDED New items value is above the maximum
10900 SENSOR_NOT_READY Command specified requires sensor to be in the READY
state.
10920 SENSOR_TYPE_NOT_ACTIVE Command refers to a inactive sensor type.
10950 DEVICE_TYPE_INVALID Command not supported on this device type.
15100 STRING_TOO_LONG String value specified exceeds maximum allowable length
20002 COMPARE_DATA_DISABLED Operation requires Barcode compare to be enabled
20003 COMPARE_MASK_INVALID Compare mask invalid. Expecting string of 1's and 0's with
length equal to compare data string
20004 NUMBER_TO_FIND_NOT_ONE Barcode number to find must be set to one for this opera-
tion.
20005 COMPARE_MASK_DISABLED Operation requires Barcode compare mask to be enabled.
80300 TEACH_SENSOR_TYPE_INVALID Teach requires Match Sensor type.
80401 PRODUCT_CHANGE_INVALID_INSPECTION Attempt to product change to a unknown or invalid inspec-
tion.
80402 PRODUCT_CHANGE_TIMEOUT The Product Change operation timed out.
9.8 Diagnostic Guide
iVu Plus BCR User's Manual
140 www.bannerengineering.com - tel: 763-544-3164 Rev. B