Banner iVu Plus BCR, User Manual, Page: 92 / 155

8.4 Teach Command Group
Command Group Item Description
Do Teach NextTrigger This commands forces the sen-
sor to perform the Remote
Teach operation on the next
trigger. This command can be
performed using the sensor's
touchscreen.
Examples
>> do teach \x0D\x0A
<< OK\x0D\x0A
8.4 ProductChange Command Group
Command Group Item Description
Do ProductChange [Name ] Forces the sensor to switch to
the specified inspection. The
sensor does not transmit a re-
sponse until the sensor has
completed the action. Inspec-
tions results will be invalid until
the next trigger.
Get ProductChange InspectionNames List of all inspections stored in
the sensor
Examples
>> get productchange inspectionnames \x0D\x0A
<< OK\x0D\x0A
>> do productchange "inspection2" \x0D\x0A
<< OK\x0D\x0A
8.4 History Command Group
Command Group Item Description
Get History Passed This value indicates the number
of passed inspections for the
active inspection. This value is
cleared (reset) whenever history
is cleared. This value is cleared
(reset) when the device starts
up or is rebooted.
Get History Failed This value indicates the number
of failed inspections for the ac-
tive inspection. This value is
iVu Plus BCR User's Manual
92 www.bannerengineering.com - tel: 763-544-3164 Rev. B