6.2 Enabling Communications
6.2.1 Setting Up Ethernet Communications
The following is the general flow for setting up for Ethernet communications between the iVu Plus sensor and a remote device:
On the Windows PC, configure the IP address as follows:
Windows XP
Windows 7
1. Open Network Properties on the PC (right-click on the Net-
work Neighborhood icon).
2. On the Local Area Connection, right-click on Properties..
3. In the dialog, click on Internet Protocol (TCP/IP) and click
the Properties button.
1. Open Network Connections by clicking on the Start button,
then selecting the Control Panel followed by Network and In-
ternet, and clicking Manage network connections.
2. Right-click the connection you want to change, then click
Properties. If you are prompted for an administrator pass-
word or confirmation, type the password or provide confirma-
tion.
3. In the Networking dialog, click on Internet Protocol Version
4(TCP/IPv4) and click the Properties button.
iVu Plus BCR User's Manual
Rev. B
www.bannerengineering.com - tel: 763-544-3164
69
Summary of Contents for iVu Plus BCR
Page 1: ...iVu Plus BCR User s Manual Rev B 1 25 2012...
Page 56: ...iVu Plus BCR User s Manual 56 www bannerengineering com tel 763 544 3164 Rev B...
Page 64: ...iVu Plus BCR User s Manual 64 www bannerengineering com tel 763 544 3164 Rev B...
Page 104: ...iVu Plus BCR User s Manual 104 www bannerengineering com tel 763 544 3164 Rev B...
