www.baldormotion.com
3-2 Basic Installation
MN1943
H
A PC with the following minimum specification:
Minimum specification
Recommended specification
Processor
32-bit Intel / AMD processor,
500 MHz
32-bit or 64-bit Intel / AMD dual-
core processor, 2 GHz or faster
RAM
256 MB
1 GB
Hard disk space
100 MB
100 MB
Communication
USB port (USB 1.1 full-speed), or
Ethernet port (100 Mbit/s, independent of office network)*
Screen
1024 x 768, 16-bit color
1280 x 1024, 16-bit color
Mouse
A mouse or similar pointing device.
(Mint WorkBench does not support touch)
Operating
system
Windows XP
Windows XP, Windows Vista, or
Windows 7 (32-bit or 64-bit)
* The Ethernet configuration used by a normal office PC is not suitable for direct
communication with the MotiFlex
e
100. It is recommended to install a separate dedicated
Ethernet adapter in the PC, which can be configured for use with the MotiFlex
e
100. See
section 6.2.4.
3.1.3 Tools and miscellaneous hardware
H
Your PC operating system user manual might be useful if you are not familiar with Windows.
H
Small screwdriver(s) with a blade width of 2.5 mm (1/10 in) or less for connector X3.
H
M5 screws or bolts for mounting the MotiFlex
e
100.
3.1.4 Other information needed for installation
This information is useful (but not essential) to complete the installation:
H
The data sheet or manual provided with your motor, describing the wiring information of the
motor cables/connectors.
H
Knowledge of whether the digital input signals will be ‘Active Low’ or ‘Active High’.
Summary of Contents for MotiFlex e100
