![background image](http://html.mh-extra.com/html/baldor/motiflex-e100/motiflex-e100_installation-manual_468893115.webp)
www.baldormotion.com
Configuration 6-13
MN1943
6.4.4 Using the Commissioning Wizard
Each screen of the Commissioning Wizard requires you to enter information about the motor,
drive or application. Read each screen carefully and enter the required information. When you
have completed a screen, click
Next >
to display the next screen. If you need to change
something on a previous screen, click the
< Back
button. The Commissioning Wizard
remembers information that you have entered so you will not need to re-enter everything if you
go back to previous screens. If you need extra help, click
Help
or press F1.
6.4.4.1 Connectivity
If you wish to change a node ID or baud rate then click in the appropriate cell and select an
alternative value. When multiple controllers are to be connected on the same bus they must each
have a unique node ID. For example, if two MotiFlex
e
100s and a NextMove
e
100 are connected
to the PC using individual USB connections, they must each be assigned a unique USB node ID.
6.4.4.2 DC bus sharing
Refer to section 3.5, and in particular section 3.5.2, for important details about DC bus sharing.
If the drive is being used as a ‘standalone’ drive (it is not sharing its DC bus or deriving power from
another drive’s DC bus) it is not necessary to change anything on this screen. However, if the drive
is sharing its DC bus (it is a ‘source’ drive), or deriving its power from another drive’s DC bus (it
is a ‘receiving’ drive), this stage must be completed.
H
For a source drive: Select the
DC bus master
option, then select the chosen ‘power ready’
digital output.
H
For a receiving drive: Select the
DC bus slave
option, then select the chosen ‘power
ready’ digital input.
6.4.4.3 Select your Motor Type:
Select the type of motor that you are using (rotary or linear).
6.4.4.4 Select your Motor:
Carefully enter the details of your motor. If you are using a Baldor Motor, the catalog number or
spec. number can be found stamped on the motor’s nameplate. If you are using a motor with EnDat
feedback, are not using a Baldor motor, or need to enter the specification manually, select the
I would like to define a custom motor option
.
6.4.4.5 Confirm Motor and Drive information:
If you entered the catalog or spec. number on the previous page, it is not necessary to change
anything on this screen; all the required data will be entered already. However, if you selected the
I would like to define a custom motor option
, it will be necessary to enter the required information
before continuing.
6.4.4.6 Motor Feedback:
If you entered the catalog or spec. number on the previous page, it is not necessary to change
anything on this screen; the feedback resolution will be entered already. However, if you selected
the
I would like to define a custom motor option
, it will be necessary to enter the feedback
resolution before continuing.
Summary of Contents for MotiFlex e100
