![background image](http://html.mh-extra.com/html/baldor/motiflex-e100/motiflex-e100_installation-manual_468893091.webp)
www.baldormotion.com
Input / Output 5-17
MN1943
NextMove
e
100 / controller
DOUT1+
DOUT1-
8
9
MotiFlex
e
100
DIN4
CREF1
TLP127
User
supply
GND
User
supply
24 V
15
3
‘X3’
‘X9’
6k2
TLP280
100R
Figure 57 - DOUT1 - typical connections to a Baldor NextMove
e
100
5.4 USB interface
5.4.1 USB
Location
USB
Mating connector: USB Type B (downstream) plug
Pin Name
Description
1 -
(
NC
)
2 D-
Data-
3 D+
Data+
4 GND
Ground
The USB connector is used to connect the MotiFlex
e
100 to a PC running Mint WorkBench. The
MotiFlex
e
100 is a self-powered, USB 1.1 (12 Mbit/s) compatible device. If it is connected to a
slower USB1.0 host PC or hub, communication speed will be limited to the USB1.0 specification
(1.5 Mbit/s). If it is connected to a faster USB2.0 (480 Mbit/s) host PC or hub, communication
speed will remain at the USB1.1 specification of the MotiFlex
e
100.
Ideally, the MotiFlex
e
100 should be connected directly to a USB port on the host PC. If it is
connected to a hub shared by other USB devices, communication could be affected by the
activity of the other devices. A 2 m (6.5 ft) standard USB cable is supplied. The maximum
recommended cable length is 5 m (16.4 ft).
1
4
2
3
Summary of Contents for MotiFlex e100
