Baldor MotiFlex e100, Installation Manual, Page: 212 / 220

Index
MN1943
drive enable input, 5-5, 8-31
fast position capture, 5-10
motor overtemperature input, 5-12
special functions on DIN1 & DIN2, 5-10
step & direction, 5-10
Dimensions, 3-4, 3-5, 3-6
Dynamic brake.
See
Regeneration resistor
E
Earthing (grounding)
leakage, 3-15, 3-16
protection class, 3-16
protective earth (PE), 3-14
Encoder, incremental
cable, 4-3, 4-5
interface, 4-2
specification, 8-32
without Halls, 4-4
EnDat
cable, 4-14
interface, 4-13
specification, 8-33
Environmental
location, 3-3–3-4
specification, 8-35
Ethernet interface
cables, A-10
connector, 5-21
ETHERNET Powerlink, 5-20
introduction, 5-19
LEDs, 7-4
specifications, 8-33
TCP/IP, 5-19
F
Fan control & loss detection, 3-10
Fast position capture, 5-10
Features, 2-1
Feedback
BiSS, 4-7
connections, 4-1
encoder without Halls, 4-4
EnDat, 4-13
Halls-only feedback, 4-4
incremental encoder, 4-2
SinCos, 4-11
SSI, 4-9
Filters
AC line reactors, 3-19, 3-25, A-4
AC supply (EMC), 3-20, A-3
catalog numbers, A-3
sinusoidal, 3-31
Fuses, 8-2
G
General Information, 1-1
Grounding.
See
Earthing (grounding)
H
Hardware requirements, 3-1
Help file, 6-9
I
Incremental encoder
cable, 4-3, 4-5
interface, 4-2
specification, 8-32
without Halls, 4-4
Indicators
CAN LEDs, 7-3
ETHERNET LEDs, 7-4
STATUS LED, 7-2
Input / Output, 5-1
analog input, 5-2
analog input AIN0, 8-31
CAN interface, 5-22
digital input DIN0, 5-7, 8-31
digital inputs DIN1 & DIN2, 5-9, 8-31
digital output DOUT0, 5-14, 8-32
digital output DOUT1, 5-16, 8-32
drive enable input, 5-5, 8-31
encoder interface, 4-1
Ethernet interface, 5-19
motor overtemperature input, 5-12
node ID selector switches, 5-25
RS485 interface, 5-18
USB interface, 5-17
Installation
See also
Basic Installation
dimensions, 3-4, 3-5, 3-6
mechanical, 3-3