Baldor MotiFlex e100, Installation Manual, Page: 138 / 220

www.baldormotion.com
8-2 Specifications MN1943
8.2.2 AC input current (X1), DC bus not shared - all models
Tables 7 and 8 show a range of typical AC input currents at typical motor output currents. The
Typical AC supply current at full load
is calculated using an AC input power factor of 0.7 and a
motor output power factor of 0.85. It is highly recommended that fuses are used instead of circuit
breakers. Circuit breakers should only be used when absolutely necessary. Tables 7 and 8
describe the recommended fuses and circuit breakers to be used for AC power connections.
Full load output
current rating
not exceeding
Typical
AC supply
current at
Input fuse Circuit
breaker
(C type) not exceeding
(A)
current at
full load
(A)
(C-type)
1.5 1.8
Ferraz Shawmut:
A60Q5-2, 5 A (E217400)
4 A
3 3.6
Ferraz Shawmut:
A60Q8-2, 8 A (T218425)
6 A
4 4.9
Ferraz Shawmut:
A60Q8-2, 8 A (T218425)
10 A
5.5 6.7
Ferraz Shawmut:
A60Q10-2, 10 A (Z212289)
10 A
8.5 10.3
Ferraz Shawmut:
A60Q15-2, 15 A (X213322)
16 A
9 10.9
Ferraz Shawmut:
A60Q15-2, 15 A (X213322)
16 A
10 12.1
Ferraz Shawmut:
A60Q20-2, 20 A (B214338)
16 A
11 13.4
Ferraz Shawmut:
A60Q20-2, 20 A (B214338)
20 A
13 15.8
Ferraz Shawmut:
A60Q25-2, 25 A (Z214842)
20 A
17.5 21.25
Ferraz Shawmut:
A60Q25-2, 25 A (Z214842)
25 A
18.5 22.5
Ferraz Shawmut:
A60Q25-2, 25 A (Z214842)
25 A
22 26.7
Ferraz Shawmut:
A60Q30-2, 30 A (E215859)
32 A
Table 7 - AC input current and protection device ratings - 1.5 A ~ 16 A models