![background image](http://html1.mh-extra.com/html/baldor/18h-series/18h-series_installation-and-operating-manual_468867076.webp)
Section 1
General Information
Programming & Operation 4-9
MN718
Program Mode Continued
Initialize New Firmware
After new firmware is installed, the control must be initialized to the new firmware version
and memory locations. Use the following procedure to Initialize the firmware.
Action
Description
Display
Comments
Apply Power
Keypad Display shows this
opening message.
Logo display for 5 seconds.
If no faults and programmed for
LOCAL operation.
Display mode. Stop LED on.
Press PROG key
Enter program mode.
Press
Y
or
B
key
Scroll to Level 2 Blocks.
Press ENTER key
Select Level 2 Blocks.
Press
Y
or
B
key
Scroll to the Miscellaneous block.
Press ENTER key
Select Miscellaneous block.
Press
Y
key
Scroll to Factory Settings
parameter.
Press ENTER key
Access Factory Settings
parameter.
V
represents blinking cursor.
Press
Y
key
Scroll to YES, to choose original
factory settings.
Press ENTER key
Restores factory settings.
“Loading Presets” is first message
“Operation Done” is next
“No” is displayed last.
Press
Y
key
Scroll to menu exit.
Press ENTER key
Return to display mode.
Display mode. Stop LED on.
Press DISP key several
times
Scroll to diagnostic information
screen.
If you wish to verify the firmware
version, enter diagnostic info.
Press ENTER key
Access diagnostic information.
Displays commanded speed,
direction of rotation, Local/
Remote and motor speed.
Press DISP key
Display mode showing firmware
version and revision installed in
the control.
Verify new firmware version.
Press DISP key
Displays exit choice.
Press ENTER to exit diagnostic
information.
Summary of Contents for 18H Series
Page 1: ...SERIES 18H AC Flux Vector Control Installation Operating Manual 9 97 MN718 VECTOR DRIVE ...
Page 105: ...Section 1 General Information 5 18 Troubleshooting MN718 ...
Page 109: ...Section 1 General Information 6 4 Manual Tuning the Series 18H Control MN718 ...
Page 144: ...Appendix C Appendix C 1 MN718 ...