B-TEK Scales T405S, Service Manual

Page: 74 / 156

74 T405S Indicator Service Manual
6 ADMIN level menus
out This stands for outbound data configuration. This menu item
is exactly like the
in menu item except it is for outbound data.
Follow the same process to set up the 16 memory registers.
6.5.6 Printer
Prtr 1 You can choose to set up this printer or Prtr 2 . The setup procedure is the
same.
EnAbLE Choices under this item are oFF (default) or on .
brAnd Choices under this item are the five printer models supported
by this indicator:
ZEbrA , EPSnPoS , hP 14-- , hp15-- and
hp85-- .
bind Choices under this item are: Port 1 , Port 2 and EnEt 1
through EnEt 5 . Choose which port the printer output is
attached to.
The PrintEr menu is used when the indicator is interfaced with one of the printers
listed in the brAnd submenu. This is necessary to ensure all the appropriate control
codes are added to the selected print format.
If either PRTR1 or PRTR2 selections are enabled then the port that is Binded may
occasionally send out a set of random characters to test for a connected printer. Be
sure to disable these settings if the indicator is not connected to one of the printer
brands listed.
Printer
Prtr 1 Prtr 2
Brand Bind
Zebra EpsnPos Hp14– Hp15–
Port 1 Port 2
HP85–
Off On
Enable
Enet 1 Enet 5