B-TEK Scales T405S, Service Manual

Page: 24 / 156

24 T405S Indicator Service Manual
4 User level menus
StYLE Choose the style of the date display. Choices are:
MMdd2Y = Month, Day, 2-digit Year
MMdd4Y = Month, Day, 4-digit Year
ddMM2Y = Day, Month, 2-digit Year
ddMM4Y = Day, Month, 4-digit Year
4.1.3 Site ID
4.1.4 Seal
4.1.5 Archive
To exit the menu, see Exiting the menus on page 19 .
The seal switch jumper, E7, is located in the top left quadrant of the main PCB. See
T405S jumper and switch settings
on page 144 . If the jumper is installed, the indicator
is sealed. This means the only the Diagnostic, User, About, Audit and Supervisor
menus can be accessed. Other menus cannot be accessed - the display will flash
SEALEd .
Site ID
SitE Use this to enter a Site ID.
The Site ID can be used in a print format. Use the
alphanumeric entry methods described in
2.3 and 2.3 to
enter a Site ID. (maximum 6 digits)
Enter
Site ID
Seal
SEAL Use this to view the seal status of the indicator.
This is the status of the physical seal jumper inside the
indicator. If the unit is sealed, no changes can be made to
the configuration of the indicator. See the note below.
View Seal
Status
Archive
Port 1
Print
Port 2 USB
ArchiVE Allows you to print the archived transaction
information.
This item appears only if so
configured in the ADMIN menu.