B-TEK Scales T405S, Service Manual

Page: 14 / 156

14 T405S Indicator Service Manual
2 Introduction
2.1 Front panel
The front panel for the T405S is shown in Figure 2.1 and consists of the keys and the
display.
The normal function of the keys on the front panel of the T405S are listed below.
Never press a key with anything but your finger. Damage to the overlay may result if
sharp or rough objects are used.
Press the TARE key for pushbutton, key entry or preset Tare functions.
Acts as an up arrow key for menu navigation.
Allows entry of numeric values.
Press the
SELECT key to toggle between the active display values.
Press and hold to enter the setpoint editor.
Acts as a down arrow key for menu navigation.
Allows entry of numeric values.
Press the
PRINT
key to send information to a peripheral device through a
configured communications port.
Acts as a left arrow key for menu navigation and removes last digit during numeric
entry.
Press the
UNITS
key to scroll through the available units of measure while in
normal operating mode.
Acts as a right arrow key for menu navigation and inserts new digit during numeric
entry.
Press the
ZERO key
to zero the display.
Acts as an ENTER key to accept a displayed value or function.
The
SAMPLE
key can be used to perform custom application functions.
The
START
key can be used to perform custom application functions.
The
STOP
key can be used to perform custom application functions.
The F1/ID key can be used to perform custom application functions. It can also be
used to abort a numeric entry and it acts as an ESCAPE key in the menu navigation.
TARE
SELECT
PRINT
UNITS
ZERO
SAMPLE
START
STOP