B-TEK Scales T405S, Service Manual

Page: 35 / 156

T405S Indicator Service Manual 35
5.1 Diag menu
3. Press PRINT or UNITS to toggle the output on ( o.1-on ) and repeat to turn it
oFF .
Output 1 will be toggled on and off as you press the keys. This is shown
by the annunciator (
SP1) on the display turning on and off.
4. Press ZERO or F1 to stop the test …
outPut1 is displayed.
5. Press UNITS to go to the next output. Repeat the steps to test output 2 and 3.
6. When finished, press TARE …
outPutS is displayed.
5.1.8 Options
5.1.9 Logs
LogS These are logs of various functions. You can print or clear them from
memory.
Print Choose to print the log from Port 1 or Port 2.
cLEAR Choose to clear the log from memory.
The logs report will print any error conditions that may have occurred such as
overloads and underloads
Options
Bus 1
Card 1
Test
installed
options
outPutS Use this to test the various installed option cards.
buS 1 Refers to Bus 1, where the option card is
attached.
cArd 1 Refers to the option card that is installed.
Logs
Print Clear
Port1 Port2
Clr no Clr yes