B-TEK Scales T405S, Service Manual

Page: 46 / 156

46 T405S Indicator Service Manual
6 ADMIN level menus
6.3.4 Units
unit From this item you can choose which units of measure are available when
the user presses the
UNITS key during normal weighing. You can have up
to four units for viewing. They are listed as: unit 1 , unit 2 , unit 3 and unit
4 . You can assign any of the following units of measure to any of these: lb ,
1000g , oz , gr , lb-oz , cuSt 1 , cuSt 2 , cuSt 3 , cuSt 4 or oFF .
cuStoM This stands for custom unit. To use a custom unit you must first create
them by entering a ratio and a string to define it.
cuSt 1-4 You can set up one to four custom units. The process to set
up a custom unit is the same for all four.
rAtio The ratio is the number you divide into the
calibration unit of measure to create the custom
unit. Example: Ratio would equal 2000 if you
wanted to convert pounds to tons.
String Use this to enter a string label for the custom unit.
Refer to
String index/character data entry on
page 16 for instructions on how to enter a string
label. This is only used when data is transmitted
out one of the communication ports.
Units
Unit
Ratio1 String1
Custom
Cust 1 Cust 4
Unit 1 Unit 2 Unit 3 Unit 4
Off Cust 2 Cust 3 Cust 4
Lb 1000 g Oz Gr Lb-oz
Cust 1
to
Key in
value
Edit
string
Not for
Unit 1