B-TEK Scales T405S, Service Manual

Page: 70 / 156

70 T405S Indicator Service Manual
6 ADMIN level menus
Enq , Choose this to send data when the indicator
receives the configured enquire code from an
external device. The information will be sent
through the selected binding using the associated
attributes. See
ENQ & B-Cast commands on
page 85 .
SMA Choose this to send and receive data when
using the SMA (Scale Manufacturers
Association) protocol. See
SMA Protocol on
page 80 . The information will be sent through the
bound port using attributes that are predefined
by the SMA protocol.
b-cASt Choose this to send data continuously through
the selected binding using the associated
attributes. Typical use is for remote
scoreboards, displays and the Analog output
option if installed. See
ENQ & B-Cast commands
on page 85 .
PLC Choose this to send and receive data to/from a
PLC network. A binding of Enet x (1 through 5)
is required. The attributes are established using
the PLC menu described later in this manual.
See
PLC Configuration information on page 87 .
FtP Choose this to send data via FTP. A binding of
Enet x (1 through 5) is required. The Rate
attribute determines the time (in minutes)
between attempted FTP updates. A second
Protocol is required to complete the FTP setup.
This additional protocol requires a Type x =
PRINT, Bind x = File and Attributes x will need a
Print Format. Also, set File Path = FTP and
define the File Mode (File naming convention) in
the File menu described later in this manual.
rd Choose this to use the indicator as a remote
display. When set as a remote display, the
indicator will only function as a remote display
for the connected primary indicator which is
connected to the weighing platform.
nci Choose this to use the NCI communication
protocol. See
NCI commands on page 85 .
rEPortS Choose this for reports using footers and
headers.
bSq Choose this when using a BSQ base.
RD (remote display) requires selection of a port for Binding to the primary display.
Choices include Port 1, Port 2 or E-Net 1 through 5. Contact your local B-TEK
representative for information on setting up the indicator as a Secondary indicator.