B-TEK Scales T405S, Service Manual

Page: 18 / 156

T405S Indicator Service Manual 18
3 Introduction to the menus
Menus, accessed through passwords, are available in the indicator to customize and
configure the indicator for your purposes. The menu levels and their passwords are
shown below:
Some menus appear in more than one menu level. As you can see in the table above,
the 111 password gives you access to three menus; User, About and Audit. The 3570
password gives you access to those three plus the Diagnostics menu. The 3088
password gives you access to those four plus the Setup menu.
This allows the supervisor to control access to some or all of the menus based on the
passwords shared. The menus are the same no matter which menu level you access
them from.
See Using the alphanumeric keypad on page 16 for instructions on how to enter a
password to get to the menus. Key functions in the menus are shown below.
Menu Navigation Keys:
Password Menu Level Accessed Menus
111 USER User, About, Audit
3570 DIAGNOSTICS Diag, User, About, Audit
3088 ADMIN Setup, Diag, User, About, Audit
2580 CALIBRATE Calib
1793 SUPER Application specific items. See User manual.
The CALIBRATE menu level accesses the calibration procedure only. You can also
access the calibration menu through the Setup menu using the ADMIN password.
The menus are always explained in a sequential manner to cover all information in a
logical fashion. You will probably never access all the menu items in this manner. You
can navigate to the area of the menu that needs to be changed by using the menu
maps and key navigation legends which are inserted as a reminder with most menus.
Press SELECT / to move down in a menu
Press TARE / to move up in a menu, except at the
bottom item in a menu, then use ZERO / or F1
Press PRINT / to move left in a menu
Press UNITS / to move right in a menu
Press ZERO / to accept a value or choice and
move up in the menu.
Press F1 to escape and move up in the menu