T405S Indicator Service Manual
113
10.2
Editing an existing print string
10.2.1 Inserting characters
1.
To insert characters into a print string, press and hold the
SELECT
key. After
you hold the
SELECT
key for about 3 seconds the Index number will start to
automatically increment by 1 about every second as Spaces (dec 32) are
inserted into the print string. You will still see the current string character on the
right side of the display but the string index number will increment as spaces are
inserted in front of this character. So for this example, press and hold
SELECT
until the display shown below appears, then release the
SELECT
key …
2.
To start the entry of the company name press the
key to scroll
backwards until string index number 1 is again displayed, as shown below.
3.
Press
SELECT
and the display will show the center bar segments flashing as
well as the right digit. This shows you are in the editing mode.
4.
Using the numeric keypad enter 65, the decimal value for
A
and press
ZERO
5.
Press
UNITS
to advance to the next string index number and press
SELECT
…
X, 32
is displayed, where
X
is the next string index number
6.
Enter the decimal value for the next letter in the company name and press
ZERO
.
7.
Repeat steps
and
until the last character is entered. In this example that
would be
13, 10
for the line feed.
GROSS
lb
GROSS
lb
GROSS
lb
GROSS
lb
Summary of Contents for T405S
