B-TEK Scales T405S, Service Manual

Page: 62 / 156

62 T405S Indicator Service Manual
6 ADMIN level menus
Auto Choices under this are on , PwruP and oFF . Choose on (the
default setting) and the indicator will update anytime it
receives an update via FTP. Choose
PwruP to have the
indicator auto-update on powerup if an update is available.
Choose
oFF to turn auto-update off.
6.4.11 Password
PASSWd Use this to change the password for the AdMin , diAg and cALib menus.
6.4.12 Z-Lock
Z-LocK This stands for zero lock. Use this to enable and configure the zero lock
feature during an automated weighing process. When enabled, if the scale
does not achieve a stable, gross zero condition some time within X
minutes (the time you configure), then the indicator locks up and displays
a message in three, one second displays:
Z-LocK PrESS ZEro . The
operator must press ZERO to unlock the indicator.
EnAbLE oFF or on . oFF is the default.
timE Use this to set the time value, in minutes, for this function. 60
minutes is the default
If Auto = oFF , the only way to update the indicator is to use the MAnuAL update and
select YES .
Passwd
Admin Diag Calib
Key in
new PW
Key in
new PW
Key in
new PW
If the ADMIN password is changed, be sure to keep a record of it available for service
personnel or they may not be able to perform required maintenance when necessary.
Enable
On
Time
Z-Lock
Off
Key in time
in minutes