B-TEK Scales T405S, Service Manual

Page: 60 / 156

60 T405S Indicator Service Manual
6 ADMIN level menus
6.4.7 Config
conFig Use this to print out the configuration data through one of the ports or reset
the configuration, calibration or database to factory defaults. Follow these
steps:
Print Use this to print the indicator configuration information. You
pick the port to use for printing in the following steps. See the
extensive list in Chapter
9 - Printed reports (page 109)
Choices are Port 1 , Port 2 and uSb (text file).
rESEt Under this item you can choose to reset the APP.cnFg (reset
configuration settings back to how the application had it set
when it was last downloaded),
conFig (factory default
settings) and cAL (factory default calibration) memory or
choose ALL to reset both config and cal factory defaults at
once.
6.4.8 Archive
ArchiVE This stands for electronic archive. In other regions it is known as an alibi
memory or tally roll. These will be transmitted via configured
communications ports. These reports can be used to confirm a weighment
if it is ever in dispute. Only records that are qualified as a LEGAL record,
per site motion criteria, are considered as entries to this log.
Print
Port 1 Port 2 USB
Config
Reset
All Config Cal
App.cnfg
If USB is selected, a USB flash drive must be installed to create the text file of the
indicator configuration.
Archive
Enable
Off On
Print
Port 1 Port 2 USB
Appears if
Archive enabled
The indicator has memory capacity to store approximately 5,000 transactions.
The Archive report uses a rolling memory configuration (FIFO) so the oldest
transaction will be written over first when all the memory slots are filled.