B-TEK Scales T405S, Service Manual

Page: 116 / 156

116 T405S Indicator Service Manual
10 Print formatting
10.3 Inserting tokens, etc.
To insert tokens, application variables or optional parameters to add to an existing
token there are special characters available to use during character editing. When you
are at the string index position where you wish to insert a token or variable, press and
hold
SELECT to insert a space (32). Then press PRINT to return to the index position
and press SELECT . With the 32 displayed, press the C key. This will be displayed:
Now press the SELECT key to scroll through the following special characters …
] - (Closing bracket) End an optional parameter. Added automatically when a
Start parameter opening bracket [ is inserted. See the
Network tokens on page 129
[ - (Opening bracket) Start an optional parameter. When [ is selected a ] is
automatically added to the string for your benefit.
A - (Application variable) For Macros the application number is tied to the variable
number. In a LUA program you must configure the
variable to an application token.
t - (Token) See Firmware tokens on page 122 for available print
tokens that can be selected to print.
When a token t (or APP variable A) is selected, a decimal 49 is automatically added to
indicate printing of the value. If you want to print the name of the token (or APP
variable) then change (edit) the 49 to a 50.
Token entry example
If the token for Time is to be inserted, press the SELECT key until a t is flashing, then
enter 200 (decimal value for Time) and press ZERO . This will insert the Time into the
print string at the selected location. Add appropriate spacing in front or after as needed
for proper alignment in the printed data.
The value 1 in the above screen will be whatever index value you started from.