B-TEK Scales T405S, Service Manual

Page: 61 / 156

T405S Indicator Service Manual 61
6.4 System
EnAbLE Choose on to enable a PC query. If enabled, a Print menu
item appears to the right of EnAbLE .
Print You can choose to print the archive from Port 1, 2 or to USB.
(USB device must be installed)
6.4.9 Serial
SEriAL Use this to record the serial number of the indicator. The serial number is
located on the label attached to the indicator.
6.4.10 Update
uPdAtE Use this to set the conditions for the indicator to accept software updates
from a remote site. If connected to the internet, the indicator can accept a
software update file via FTP. The software update can be installed
manually or automatically when the file is received or on the next powerup.
MAnuAL Choices under this are no and YES . Choose YES to start the
update process. Choose no to not do an update. no is the
default.
If you choose no , no update occurs and MAnuAL is
displayed. If you choose YES , the indicator will update and
reboot.
Serial
Key in 1st four
digits of indicator
serial number
Key in
last digits
Update
Manual
No Yes
Auto
On Off Pwrup
Manual update selection only applies when AUTO update is disabled and only if a file
has been sent via FTP to the indicator and is waiting to update.