B-TEK Scales T405S, Service Manual

Page: 57 / 156

T405S Indicator Service Manual 57
6.4 System
MAX Activate this to see the maximum weight value.
g totAL Activate this to see the gross total weight value.
n totAL Activate this to see the net total weight value.
t totAL Activate this to see the tare total weight value.
c totAL Activate this to see the count total value.
trAncnt Activate this to see the transaction count value.
count Activate this to see the count value.
Pc Wt Activate this to see the piece weight value.
A2d cnt Activate this to see the A to D count value.
PErcEnt Activate this to see the percent value.
inMo Activate this to see the averaged weight value when an
inmotion application is operating.
tArgEt Activate this to see the target weight value.
gtotPLS Activate this to see the gross total + current gross value. This
parameter is commonly used in conjunction with the
accumulation procedure for multiple-dump batching
applications.
gtotMin Activate this to see the gross total - current gross value.
ntotPLS Activate this to see the net total + current net value.
ntotMin Activate this to see the net total - current net value.
ctotPLS Activate this to see the count total + current count value. This
parameter is commonly used in conjunction with the
accumulation procedure for multiple-dump batching
applications based on piece count.
ctotMin Activate this to see the count total - current count value.
gr AVg Activate this to see the average gross value. This is the
average gross weight calculated through use of the % +
Averaging macro command. This command can be used to
start, stop and resume averaging. A separate average gross
parameter is maintained for each enabled scale.
nt AVg Activate this to see the average net value. The characteristics
of the average net parameter are identical to that of the
average gross.
ct AVg Activate this to see the average count value. This represents
the number of times the gross and net weight were
accumulated when using the %+ Averaging command.
nt Min Activate this to see the net minimum value.
nt MAX Activate this to see the net maximum value.
FFALL 1 Activate this to see the free fall 1 value. Free fall is like preact.
This is the calculated amount of material that will fall on the
scale base on the current flow rate.